產品介紹：

The Series BYDS Bypass Damper Switch is designed to control motorized bypass dampers. As individual zone dampers open and close, the system static pressure will rise and fall. In order to maintain proper airflow and static pressure through the HVAC system, a bypass system incorporating a floating type motorized damper and a static pressure control should be incorporated. A typical on/off pressure switch cannot operate in this application due to the high cycle rate that would result, eventually causing contact burnout. The BYDS static pressure control is equipped with a solid-state switching and timing circuit to enhance operation and improve long-term reliability in this demanding application.

技術參數：

介質： Air and non-combustible, compatible gases.

材質：Diaphragm Material: silicone; Housing Material: switch body: PA 6.6 and POM; Cover: polystyrene.

溫度： Process ambient temperature from -4 to 185°F (-20 to 85°C).

壓力： Max. Operating Pressure: 40" w.c. (10 kPa) for all pressure ranges.

開關類型： Single-pole double-throw (SPDT).

額定電氣： 1A @ 24 VAC.

電氣連接： Screw terminal block. M20 x 1.5 with cable strain relief or 1/2" NPT connection.

過程連接：5/16" (7.94 mm) outside diameter tubing, 1/4" (6.0 mm) inside diameter tubing.

安裝方向：Vertically, with pressure connections pointing downwards.

封裝：NEMA 13, IP54.

壽命： Over 10⁶ switching operations.

重量：5.6 oz (160 g).

選型表：