全球最先進的測油儀，北京中西集團獨家代理，有現貨！
推薦應用領域
環 境 : 監測水的質量和危險的垃圾點
工 業 : 檢查廢水的流入和排入
海 運 : 監測船只的棄物
石油處理 : 監測油/水分離過程的效率
機油沉積 : 監測在清洗儲油罐時的排棄物
汽 車 : 監測維修站的廢水排出
質量保證 : 測量紡織品和金屬品上殘留的機油
H3-OCMA-350具有保證測量精度的多種特色
穩定的讀數:
測油儀的數據評價功能可分析數據,檢查數據是否穩定,并顯示穩定的讀數.
自監測
LCD屏幕上顯示的信息可使您隨時知道任何電路的故障,測量的不穩定和部件的毛病,因此使您能保證測油儀正確的工作.
簡便的數據保存
H3-OCMA-350保存測量時間和測量日期并且記錄下每個數據設置.在打印時,它同時提供 給您時間記錄和測量數據,很便于數據保存
H3的S-316溶劑
H3-OCMA-350使用高效、安全的S-316萃取溶劑從含油的水試樣、土壤度樣或產品表面萃取油成分，得到的萃取液用IR吸收技術（非分散紅外技術）分析，這種技術專門適用于油等碳氫化合物。
H3-OCMA-350是在3.4微米到3.5微米范圍內測量吸收度值。下方的兩個圖形描述了（1）石油和（2）H3-S-316溶劑的吸收光譜。包括油的包有碳氫化合物，都吸收3.4微米到3.5微米的紅外光譜，因此，測油儀可以快速、準確地測量出萃取液中含有的任何碳氫化物 ，測量數據不會因溶劑的存在而產生誤差。
利用SR-300溶劑回收器，H3的S-316溶劑可以循環使用。溶劑的循環使用。溶劑的循環使用不僅降低了溶劑費用，而且有助于保護環境。
技術指標：
應用：淡水、咸水的油污染；土壤分析
原理：溶劑萃取， NPIR分析（紅外光譜分析法）
檢測器：熱電傳感器
試樣池：20毫米長的石英試樣池
測量范圍和單位：0-200mg/l,0-1000mg/kg,0-1Abs
分辨率：
mg/l: 0-99.9mg/l;0.1mg/l 100-200mg/l;1mg/l
mg/kg: 0-9.99mg/kg;0.01mg/kg 10.0-99.9mg/kg;0.1 mg/kg 100-1000mg/kg;1mg/kg
Abs: 0-1Abs;0.001Abs
重復性：
mg/l: 0-9.9mg/l;+0.4mg/l +1數字
10.0-99.9mg/l;+2.0mg/l +1數字
100-200mg/l;+4mg/l +1數字
Abs: 全量程+1%
測量：手動控制
校準：在將校準液注入測油儀后，儀器可進行自動校準
萃取溶劑：H3 S-316溶劑
試樣池容積：大致6.5毫升
顯示：測量數值；有背景光的3 1/2位LCD狀態信息，有背景光的LCD字節（16×2個字節）
功能：自診斷，自動保持功能，日歷表
輸出：RS-232C和中心打印機端口
環境溫度：0-40℃
電源要求：100-240VAC +10%，50/60Hz,60VA
外部尺寸：200（H）×250（W）×285（D）毫米 7.9(H)×9.8(W)×11.0(D)英寸
重量：大致5公斤
SR-300型溶劑回收器（備選）
高效的SR-300型溶劑回收器可以使您每次測量的溶劑費用減少90%，這一備選設備是專門為H3的S-316溶劑設計的，它有一個裝有活性碳和活性鋁的雙柱，具有很強的過濾能力，操作簡便，并不需要電源。
回收器尺寸：200（W）×200（D）×600（H）毫米 7.9(W)×7.9(D)×23.6(H)英寸
Pushbutton simplicity, perfect for field analysis.
Compact and simple, HORIBA’s OCMA-350 oil content analyzer delivers quick, accurate measurements in the lab or in the field. It efficiently measures the level of oil in water or soil for environmental applications, checks for residual oil on semiconductor parts which have been cleaned, and measures oil on ayn industrial surface.
Using the OCMA-350 is almost effortless. Simply inject the extract from your sample, dissolved in Horiba’s S-316 solvent, into the measuring cell, and press one button. You can even use your PC to simplify operation.


Recommended Applications
Environment: Surveying water quality and hazardous waste sites
Industry: Monitoring wastewater influent and effluent
Marine transportation : Checking bilge and ballast discharge
Petroleum processing : Monitoring the efficiency of oil/water separation processes
Oil depots :Monitoring the discharge produced when cleaning storage tanks
Automotive: Monitoring waste-water discharge from service stations
Quality Assurance: Measuring residual oil on textiles and metal parts.

The OCMA-350 has various special features to assure accurate measurements.
Stable readout
The unit’s data evaluation function analyzes the readings, determines when the value has stabilized, and displays than stable value.

Self-monitoring
Messages on the LCD screen inform you of any electrical malfunctions, irregularities in measurement, and deterioration of parts, so that you can always be assured of proper functioning.

Simplified recordkeeping
The OCMA-350 keeps a record of the time and date of measurement along with each data set it records. When printing out, it provides you with both the time and the measurement, allowing for easy recordkeeping.

Measurement of residual oil
The OCMA-350 makes it easy to measure residual oil on precleaned parts.
Choose a reasonably sized sample
Measure out an appropriate amount of solvent, and immerse the part in the solvent until all the residual oil has dissolved.
Introduce the resulting solution to the measuring cell, and set the cell in place.
Press the start button and wait for the results.

HORIBA’s S-316 Solvent
The OCMA-350 uses the highly effective, environmentally-safe S-316 extraction solvent to extract the oil components from oily water samples, soil samples or product surface. The extract is analyzed using IR absorbance, a non-dispersive infrared spec-trophotometric technique which is specific to hydrocarbons such as oil.

The OCMA-350 measures absorption in the 3.4 to 3.5 micrometer range. The two graphs at the right show the absorption spectra of (1) petroleum and (2) HORIBA’s S-316 solvent. All hydrocarbons, including oils, absorb infrared radiation at about 3.4 to 3.5 micrometers .The S-316 solvent absorbs no infrared radiation in that range. As a result, the unit can measure any hydrocarbons in the extraction solvent quickly and accurately, with no distortion of values due to the presence of the solvent.

HORIBA’s S-316 Solvent can be recycled with the aid of t he optional SR-300 Solvent can be recycled with the aid of the optional SR-300 Solvent Reclaimer. Recycling the solvent not only cuts your solvent costs, but also helps protect the environment.

Specifications
Application: Oil contamination of fresh and salt water; soil analysis
Principle: Solvent extraction, NDIR analysis(infrared spectroscopy)
Detector: Pyroelectric sensor
Cell: Quartz cell, cell length 20 mm
Measuring range and unit: 0 to 200mg/l, 0 to 1000 mg/kg, 0 to 1 Abs.
Resolution:
mg/l; 0 to 99.9mg/l; 0.1mg/l
100 to 200mg/l; 1mg/l
mg/kg; 0 to 99.9 mg/l; 0.1 mg/l
10.0 to 99.9 mg/kg; 0.1mg/kg
100 to 1000 mg/kg; 1 mg/kg
Abs; 0 to Abs; 0.001 Abs
Repeatability:
mg/l; 0 to 9.9mg/l; ±0.4mg/l ±1 digit
10.0 to 99.9 mg/l; ±2.0mg/l ±1 digit
100 to 200 mg/l ±4mg/l ±1 digit
Abs; ±1F.S.
Measurement: Manually controlled
Calibration: Automatic calibration after the calibration standard is introduced to the instrument
Extraction solvent: HORIBA S-316 solvent
Sample/solvent volume: Approx. 6.5 ml, ratio of sample to solvent is 1:1
Display: Measured value; 3 1/2 digits LCD with back-light
Message; Character display LCD with back-light(16×2 characters)
Functions: Self diagnostics, Auto hold function, Calendar clock
Output: RS-232C and centronics printer port
Ambient temperature: 0 to 40℃
Power requirement: 100 to 240 VAC±10%, 50/60 Hz, 60VA
Dimensions: 200(H) ×250(W) ×285(D)mm
7.9(H) ×9.8(W) ×11.0(D)mm
Weight: Approx. 5kg/11ib
Model SR-300 Solvent Reclaimer(optional)
Highly efficient, the SR-300 solvent reclaimer can reduce your per test solvent cost by up to 90%. This optional unit, designed especially for reclaiming HORIBA’s S-316 solvent, features a double column of activated carbon and activated aluminum. It has a large filtering capacity, is easy to operate, and requires no electricity.
External dimensions:
200(W) ×200(D) ×600(H)mm
(W) ×7.9(D) ×23.6(H)in